SDBS 2400 A1
■
14
│
GB
│
IE
│
NI
Vertical steam ironing
1) Hang the fabric to be ironed on a clothes hanger which is hung against
a heat-resistant surface.
2) Rotate the temperature control
to set the required ironing temperature.
The temperature control
must be set to a minimum of
to produce
steam.
3) Wait until the heat-up indicator lamp
goes out.
4) Press the steam strength button
6
to set the required steam strength:
–
If the "max" steam indicator lamp
3
is lit up, a lot of steam will be
produced.
–
If the "eco" indicator lamp
-
is lit up, less steam will be produced.
As soon as the "eco"
-
or "max"
3
indicator lamps light up continuously
(depending on the setting) you can start steam ironing.
5) Hold the steam iron in a vertical position and press the steam button
.
6) Touch the fabric lightly with the sole of the iron
and steam it to remove
creases.
7) Release the steam button
to stop producing steam.
Refilling with water
You can refill the appliance with water while it is switched on.
1) Put the iron down on the base station placement area
.
2) Refill the water tank as described in the section "Filling the water tank".
Summary of Contents for 277706
