Silvercrest 277706, Operating Instructions Manual, Page: 15 / 113

SDBS 2400 A1
■ 12
│
GB
│
IE
│
NI
NOTE
► Do not tip or swivel the steam station when the water tank is full. If you
do, water may be discharged from the filler opening.
5) Insert the plug into a mains power socket.
Ironing without steam
NOTE
Always set the temperature control to the lowest level (min) before switching
the appliance on. The symbols on the temperature control correspond to
the following settings:
Symbol Material
Temperature
(approx.)
min -
Synthetics 70 - 120 °C
Silk 70 - 120 °C
Wool 100 - 160 °C
( - max)
Cotton/linen 140 - 210 °C
1) Press the On/Off button 0 to turn the appliance on. The indicator lamp
integrated in the On/Off button
0
lights up and the "max" steam indicator
lamp 3 flashes.
2) Rotate the temperature control to set the required ironing temperature.
3) The heat-up indicator lamp lights up during heating. As soon as the heat-
up indicator lamp goes out, the set temperature has been reached and
you can start ironing.
4) Put the iron down on the base station placement area after ironing. Set
the temperature control to "min".
5) Press the On/Off button
0
to turn the appliance off. The indicator lamp
integrated in the On/Off button
0
and the "max" steam indicator lamp
3
go out.
6) Pull out the plug from the mains socket.