Silvercrest 270063, Operation And Safety Notes, Page: 30 / 45

30 GB/MT
Important safety instructions / Start-up
- if you suffer from a serious illness
or have had an operation on
the upper part of your body,
- if you have a pacemaker, implant
or other medical device,
- if you are suffering from throm-
bosis,
- if you suffer from pains with an
undiagnosed cause.
The massage cushion must not
be used on the face (e.g. eyes),
on the larynx, the feet or other
sensitive body parts. There is a
risk of injury.
Repairs may only carried out only
by qualified specialist personnel
or in a workshop approved by the
manufacturer. Improper repairs
may result in considerable danger
for the user.
Start-up
Do not open the zip fastener on the
massage cushion. It is provided for
reasons connected with the manu-
facturing process only.
Note: The massage cushion may give off an
odour of plastic on first use. This odour will cease
to develop after a short while.
Note:
Do not lie, sit or stand with your full
weight on the moving parts of the massage
cushion and do not place any objects on the
cushion.
Note:
Ensure that you are experiencing the
massage as pleasant and relaxing. If necessary,
vary the pressure and/ or your position. Stop the
massage at once if it is painful or unpleasant.
Note: The massage cushion has two functions
for a targeted massage treatment, finger pres-
sure massage and heat. The thermal function
can also be used without the shiatsu massage.
Note: Use the massage cushion for a maximum
of 15 minutes. Longer use may lead to over-
stimulation and hence tension in the muscles.
The device will automatically shut off after
approx. 15 minutes.
Note:
Allow the device to cool down before
you use it again.
Place the massage cushion
2
on the back rest
of a high chair and attach it to the back with a
Velcro band.
Sit on the chair and check if the massage cushion
is in the desired position. If not, change the
position.
Insert the connector plug into the power cable
in the massage cushion. Position the lead to avoid
creating a trip hazard. Plug the mains adapter
8
into the socket. Ensure that this is always
accessible.
Control the massage cushion
2
with the
operating device
3
.
Switch the device on by pressing the ON / OFF
button
4
. The green power indicator light
switches on.
Press the button
6
to switch on the massage
function with outward rotation. The green
LED switches on.
Press the button
5
to change the direction
of rotation. The LED switches off and is now
green.
Note:
You can also start the massage with the
other rotation direction.
The thermal function can be switched on at any
time during the shiatsu massage. Press the heat
button
7
, to activate this function. The red LED
switches on. The heat is distributed across the
massage heads
1
.
Press the heat button
7
again to switch off the
heat function. The red light switches off.
Press the ON / OFF button
4
to switch the
device off. The green power indicator light
switches off. Then pull the mains adapter
8
out of the mains socket.
Troubleshooting / Cleaning and Care / Storage / Disposal
270063_silv_Shiatsu-Nackenmassagekissen_content_ES_IT.indd 30 24.08.15 08:48