9
GB
7. Operating the device
7.1
Insert bag
1. Place the vacuum bag into the water
container
4
. Ensure that the water level
does not rise above the marking
MAX17
. If necessary, scoop out wa-
ter with a cup.
2. The bags should be underwater. If they
float on the surface, cover them e.g.
with a plate.
3. Replace the lid
2
. Without the lid, too
much heat escapes, and the times spec-
ified in the recipes will no longer be
correct.
Working with the separating
grid
If you use the separating grid, allow one
vacuum bag to slide into each of the 4 com-
partments.
Ensure that all the bags are standing freely
in the compartments, and that they are in
contact with the water on all sides.
FIGURE A:
the separating grid is placed
perpendicular to the bottom grid. The stand-
ing surfaces of the separating grid are
placed directly on the base of the water con-
tainer
4
.
NOTE:
if bags are pressed firmly against
one another (e.g. by pressing them down
into the individual compartments), the cook-
ing time becomes longer and incalculable.
7.2
Starting the program
DANGER! Risk of injury
through burning!
~
The surfaces of the device become very
hot during operation. During opera-
tion, only touch the device on the oper-
ating panel
7
, on the lid handles
1
, or
by the handles
5
of the base unit.
~
When removing the cooked food, use
appropriate kitchen utensils. The water
can be very hot.
NOTES:
• Pressing the buttons
-/+13
adjusts the
minutes or degrees with each press.
Hold the buttons down to switch to high-
speed adjustment.
• During the first use, you may notice
slight
formation of smoke and odour.
This is harmless and stops after a short
amount of time. Please ensure sufficient
ventilation in the meantime.
1. Press the On/Off button
15
for at
least 2 seconds. The display
11
shows
0000
. The device is now switched on.
2. Press the Temperature button
16
.
The display will show
40C
as the pre-
set temperature. This is not the current
water temperature.
3. Set the desired water temperature, at
which the food should be cooked, us-
ing the buttons
-/+
13
. The selected
temperature is shown on the dis-
play
11
. You can select values be-
tween 40 and 99 degrees Celsius.
The LED will flash for as long as you
are working in temperature mode.
4. Press the button for the time settings
12
. The display
11
will show
01:00
(one hour).
5. Set the desired time, for which the food
should be cooked, using the buttons
-/+
13
. You can set precisely any time
between 1 minute and 24 hours.
6. Start the program by pressing the but-
ton
14
. The LED
14
lights up.
On the display
11
, the time is counted
down in minutes
once the set tem-
perature has been reached.
The LED
14 starts to flash.
BB53B6RXV9LGHB%ERRN6HLWH6RQQWDJ$XJXVW
