48
SGP 28 A1
GB
MT
Adding decorations
NOTE
Use the nozzles
9
exclusively for shaping creamy substances, such as
whipped cream.
The decoration substance must have a soft and creamy consistency, otherwise
it will block the nozzle
9
.
Press the start button
1
only shortly to start with, to see how the substance
responds. It is possible that the substance may continue to fl ow out for a short
time.
1) Hold the biscuit shaper at a slight angle.
2) Press the start button
1
.
3) As soon as the decoration substance starts to fl ow from the nozzle
9
, move
the biscuit shaper in accordance with the decorative design you wish to create.
NOTE
If the pusher
6
blocks during use, it may be that the substance or the dough
is too fi rm. Remove all of the substance/dough and, if necessary, mix a little
liquid into it.
Refi lling with dough or decoration substance
DANGER
Remove the plug of the power cord
3
from the mains socket before refi lling
the dough or decoration substance.
1) Turn the container
7
so that the arrow on the container
7
moves from the
marking to the marking on the motor unit
4
.
2) Remove the container
7
from the motor unit
4
. Push the threaded rod
5
with the pusher
6
back into the motor unit
4
.
NOTE
The mechanical propulsion between motor and pusher
6
is only engaged if
the container
7
is engaged in the motor unit
4
. Thus if the container
7
is
removed, you can simply push the pusher
6
into the motor unit
4
.
If necessary, also remove any dough residue that may have collected behind
the pusher
6
.
DANGER
The motor unit
4
may NOT be submerged in water. If necessary, it can be
wiped clean with a moist cloth.
IB_100631_SGP28A1_LB5.indb 48
IB_100631_SGP28A1_LB5.indb 48
25.07.14 08:09
25.07.14 08:09
