3. Inflate the chambers slightly.
At this time, we suggest first inflate the air chambers to about 10% (about 20 times by foot pump) of
their capacity so that the hull material does not stick to itself and the floorboards can be easily inserted.
STEP TWO:
ALUMINIUM BOARD, SEAT AND SEAT BAG ASSEMBLY
1. Slide in Wooden board-1
Start by fitting the bow wooden board between air tubes and bottom. Slide and push it forward as for as
possible, until it has reached the tip of the bow, and that the air valve of the inflatable keel fits into the
hole in the bow wooden board.
2. Install AL board-2
Simply slide AL board-2 against wooden board-1 with modest pressure. Make sure the edge of board-2
fits into the rear end of board-1.
3
4
3. Insert the inflation adapter to the valve. Secure
the adapter by turning it clockwise. Connect the
pressure gauge and pump to the adapter. Start
inflating until the pressure reach 0.25 bar.
4. Remove the pressure gauge and pump. Put
the cap on the valve.
6
Summary of Contents for Calypso 360 AL
Page 2: ......
