manualshive.com logo in svg

Silva s15, Operation Manual, Page: 5 / 51

Share
Download
Silva s15 Operation Manual Download Page 5

Operation Manual 

  S15

 

 

Page 

4

 

2.   Front Panel Description 

 

2.1 Front 

 
 
 
 
 
 
 
 
 

1. POWER 

SWITCH 

(ON) 

Press the 

(ON)

 button once on the front panel of the S15. 

To switch off, press 

(ON)

 again the S15 switch off. 

2.  CHANNEL MEMORY KEY (M+) 

The function of this key is to add or delete the currently selected channel 
from the scan memory. 

3.   CLEAR KEY (CLR) 

Stops current task and returns to the main screen. 

4.  SQUELCH MODE SELECTION KEY (SQ)  
5.  VOLUME CONTROL MODE SELECTION KEY (VOL) 
6.   FUNCTION SELECT KEY (F) 

Press this key once to enter the function selection mode; the LCD will 
display the function menu. The selectable functions are DUAL WATCH, 
FULL SCAN, MEMORY SCAN, H/L (high/low) POWER and DIM. Press 
the 

(F)

 key again to confirm and change to selected function screen.  

 7.  DOWN KEY (

▼

) 

Selects the desired channel, squelch control level or volume control 
level. Each press selects the next lower channel number or level. Press 
and hold to scroll down through all of the channels. 

8.  CHANNEL 16 KEY (16)  

Used to immediately return to channel 16 from any channel or function. 

 

Summary of Contents for s15




















































Reviews:

No comments