manualshive.com logo in svg

Silva s15, Operation Manual, Page: 32 / 51

Share
Download
Silva s15 Operation Manual Download Page 32

Operation Manual 

  S15

 

 

Page 

31

Press 

◄

 or 

►

 key to select channel (the 5th - the 9th channel) that is to 

be deleted, then press 

(ENT)

 key to accept. 

 

9.6  SET THE DIRECTORY OF CALLED MMSI AND VESSELS NAME. 
 

The DIRECTORY screen is used to add, edit and entries from a list of up 
to 20 stored MMSI numbers, which can be recalled in the routine call 
screen. Press 

▲

 or 

▼

 key to move the 

►

 symbol on the DSC SETTING 

screen in front of DIRECTORY, then press 

(ENT)

 key, the DIRECTORY 

screen appears as follows: 

 
 
 
 
 
 
 
 

To access a new entry, press 

▲

 or 

▼

 to move symbol 

►

 on the screen 

in front of ADD, then press 

(ENT)

 key to enter DIRECTORY-ADD screen 

as follows: 

 
 
 
 
 
 

 

 

Use the numeric soft keys

 

to enter a name and number, and use the 

◄

 

or 

►

 keys to move backwards and forwards along the line, When the 

name and number have been entered, press 

(ENT)

 key to confirm. 

 

Summary of Contents for s15




















































Reviews:

No comments