67 | en
After approx. 1 second, the indicator light “Skin type warning/Light pulse
ready”
(orange) also lights up continuously.
When the device is switched on the energy level is automatically set to the
lowest level (only the indicator light for energy level
1
comes on).
2. Select the energy level you want by pressing the
button. Each press of
the button increases the energy level by 1 until a maximum of
5
, and after-
wards it starts again at level
1
.
The indicator lights light up green up to the selected energy level.
When you use the device for the first time, ensure you refer to the
section “Selecting the energy level” further back in this chapter!
Depending on the strength of the energy level you have selected, there are
two ways you can use this device:
— the
pulsating
method on
higher
energy levels, which gives you better
control over the treated skin areas.
— the
gliding
method on
lower
energy levels, for time-saving and efficient
treatments.
If you select the pulsating method:
3. Using firm but gentle pressure, apply the device with the treatment surface
placed flat onto the area of skin to be treated. The indicator light “Skin type
warning/Light pulse ready”
slowly begins to flash.
WARNING
– risk of injury
Do not treat the same area of skin more than once per hair removal
session! Doing so increases the risk of side effects.
