![background image](http://html1.mh-extra.com/html/silicon-laboratories/telegesis-gw357/telegesis-gw357_product-manual_1271785017.webp)
ZigBee Communications Gateway
©2016 Silicon Labs
-17-
ZigBee Communications Gateway
5.3.2.1.1 Gateway Configuration
a. Current Firmware Info
This field gives information about the current firmware running on the gateway.
b. Web Terminal
This option enables or disables the access to ZigBee module via the web terminal. The
Gateway provides an access to the ZigBee module via Web Terminal page which can be
used to issue commands to the ZigBee module and monitor the response of the module. The
Web Terminal only supports communication in ASCII.
Default value is enabled.
c. Dialout TCP Sockets
Enable
The Gateway can establish an outgoing TCP socket connections to a specified dialout
addresses and port numbers. This option can enable or disable the outgoing socket
connections for both the ZigBee modules.
Default value is disabled.
Out 1 Address
The address specified in this option is used by the gateway to establish the outgoing socket
connection for the 1
st
ETRX3 ZigBee module. The dialout address can either be an IP
address or a host name.
Out 1 port
This item specifies the port number for the dialout connection from 1
st
ETRX3 ZigBee module.
Out 2 Address
3
The address specified in this option is used by the gateway to establish the outgoing socket
connection from the 2
nd
ETRX3 ZigBee module. The dialout address can either be an IP
address or a host name.
3
This option only available in Gateway models with two ZigBee modules on-board. Please refer order codes