manualshive.com logo in svg

Silicon Laboratories Si2404, Manual, Page: 299 / 307

Share
Download
Silicon Laboratories Si2404 Manual Download Page 299

AN93

Rev. 1.4

299

UltraCOM Terminal Emulator

UltraCOM is a powerful serial terminal tool developed by Silicon Laboratories for use with the ISOmodem  devices.
UltraCOM is capable of supporting up to four concurrent DTE Terminal windows, which interface to serial COM
ports. The DTE Terminal provides file transfer tools for patch loading and block data transfer. It supports a full
range of COM port settings, including baud rate, data size, parity, mark bits, flow control, and timeouts. The main
terminal panel can display non-printable characters; it also supports copy/paste, search, and file logging. 

UltraCOM provides a basic scripting language for automated DTE port control with a time-stamped results log. The
tool also provides synchronized WAV file recording via the Microsoft Windows  OS mixer device. This feature
provides a way to record a telephone call on the PSTN line that is synchronized to the DTE commands and data.

Terminal Overview

The Terminal menu is used to open a connection to up to four serial ports. The DTE Terminal window consists of a
terminal toolbar, main terminal panel, terminal shell panel, and terminal command history, and status bar as shown
in Figure 71.

Figure 71. UltraCOM Terminal Window

Main Terminal Panel

The Main Terminal panel provides direct, live typing to the serial port. These direct commands are buffered in the
command history panel upon the detection of a carriage return. The proceeding characters (since the previous
carriage return) are appended to the Command History panel. 

Terminal Shell Panel

This panel provides a buffer to construct a command or paste text from other applications. The text in this panel is
sent to the modem when the user types a carriage return. The transmitted string is also stored in a shell history list,
which is navigated using the up and down arrows, page up, and page down keys. 

 

Summary of Contents for Si2404




















































































































































































































































































































Reviews:

No comments