RF-to-USB-RD
Rev. 0.1
9
7. Additional Information
The RF to USB RD uses a 915 MHz RF link. The demo firmware is written on top of EZMAC
®
PRO. The RF link
data rate is 100 kbps using GFSK modulation. Both demo applications use EZMAC PRO channel 0.
The output power is +13 dB for both the USB Dongle and Sensor Node. The PCB antennas on both Sensor Node
and USB Dongle are designed for lowest possible cost, not maximum range.
For firmware source code or additional information, please contact MCU support.
http://www.silabs.com/support/
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
