22
Chapter 3: Setting Up the Terminal Emulator and Starting WebFORCE Internet Gateway
Using WebFORCE Internet Gateway From Your Web Browser
To finish configuring WebFORCE Internet Gateway, use a Web browser (such as
Netscape) on a workstation on your LAN. Access the Internet Gateway server with the
Web browser, and fill out a series of forms that complete the configuration process.
Follow these steps:
1.
Be sure the server is running.
■
Use the
chkconfig
command to turn on the Internet Gateway:
chkconfig webface on
■
Start the Internet Gateway Web server:
/etc/init.d/webface start
2. Start your Web browser (for example, Netscape) from a computer or workstation on
your LAN.
■
You can run the Web browser from any computer or workstation that is on the
same LAN as the Internet Gateway server.
■
For best results, use Netscape Navigator 2.0 or later. You can use other
browsers, but they must support HTML frames and fill-out forms.
3. Open the following uniform resource locator (URL):
http://
server_ip_address
:2077/
■
In this URL,
server_ip_address
is the IP address you assigned to the Internet
Gateway server. For example:
http://151.166.96.36:2077/
If there is no root password, you will be required to create one. You are then
prompted to enter an administrative account user ID and create a password for the
administrative account.
Then you see the Internet Gateway home page shown in Figure 3-1 in your browser
window.
