14
007-4243-002
3: VBOB Chassis Connectors and Cabling
Figure 3-2
Rear Chassis LEDs
Getting Started
Follow these steps to connect the cables and boot the host system. See Figure 3-1 and
Table 3-1 for the location and functional descriptions of the rear panel connectors.
1.
Be sure the VBOB power switch at the back of the chassis is in the
Off (o)
position.
2. Connect one end of the power cord to the VBOB power plug and the other end of
the cord to your AC power source.
3. Connect all other cables as applicable.
4. Turn the VBOB power switch to the
On (-)
position.
5. Boot the SGI host system.
Note:
You can find cabling instructions for a specific configuration in the owner’s guide
provided with your VBOB-related product.
HD Out
TMDS B
TMDS A
1
HD In
GP I/O
RS-422
RS-232
SD
Genlock
Timing Out
HD
Genlock
LVDS A
LVDS B
SD In
SD Out
Present
Present
2
2
2
2
1
1
1
1
2
C
D
A
B
SD1 input
SD2 input
SD Genlock
HD Genlock
HD1 input
HD2 input
Processor activity
LVDS input