Rear Chassis LEDs
007-4243-002
13
Note:
VBOB has two BNC connectors for each external HD and SD genlock source. You
can use either of these connectors as an input or a loop-through.
Rear Chassis LEDs
There are eight LEDs on the rear of the VBOB chassis, as shown in Figure 3-2.
The SD, HD, Genlock, and LVDS LEDs indicate the following:
•
SOLID
- Signal present and valid
•
FLASHING
- Signal present but unrecognizable (invalid, such as wrong video
format)
•
OFF
- No signal present
The last LED on the right indicates the processor activity. This LED should flash at a rate
of about 1 Hz.
24.
HD in #1 BNC
High Definition in BNC #1 (link A)
25.
HD in #2 BNC
High Definition in BNC #2 (link B)
26.
TMDS A
TMDS digital video in connector (optional)
27.
TMDS B
TMDS digital video in connector (optional)
28.
LVDS A
LVDS connector
29.
LVDS B
LVDS connector
Table 3-1 (continued)
Rear Panel Connectors
ID #
Connector Name
Connector Function