Silicon Graphics Origin200, Owner'S Manual

Page: 16 / 288

xvi
List of Figures
Figure 8-15
Installing a 3.5-Inch Peripheral in an Origin200 System 175
Figure 8-16
Opening the Front Door of an Origin200 System 176
Figure 8-17
How the 3.5-inch Drives Are Numbered in an Origin200 System 177
Figure 8-18
Removing a 3.5-inch Drive from an Origin200 Server 178
Figure 8-19
Location of the Serial Port Connectors on an Origin200 System 181
Figure 9-1
Ethernet 10-Base-T/100-Base-TX Port LEDs 193
Figure 10-1
Removing the Chassis Access Cover 200
Figure 10-2
Cable Connections and Spring Clips on the SCSI Backplane 201
Figure 10-3
Disconnecting the Fan and Fan Power Cable
(Other Components Removed for Clarity) 203
Figure 10-4
Removing the Fan From the System 204
Figure 10-5
Unfastening the PCI Plenum Divider Sheetmetal 205
Figure 10-6
Removing the PCI Plenum Divider 206
Figure 10-7
Disconnecting Cables from the Logic Carrier 207
Figure 10-8
Unfastening the Logic Carrier 208
Figure 10-9
Removing the Logic Carrier 209
Figure 10-10
Lowering A Logic Carrier Into the System 210
Figure 10-11
Fastening the Logic Carrier 211
Figure 10-12
Attaching the Logic Carrier Cables 212
Figure 10-13
Installing the PCI Plenum Divider 213
Figure 10-14
Fastening the PCI Plenum Divider 214
Figure 10-15
Removing the Power Supply Screws 215
Figure 10-16
Removing the Origin200 Server Power Supply 216
Figure 10-17
Location of Origin200 Server Power Supply Screws 217
Figure 10-18
Removing the Front Bezel Crossbar 219
Figure 10-19
Removing the System Controller Assembly From the Chassis 220
Figure 10-20
Removing the Module System Controller Board From Its Carrier 221
Figure 10-21
Removing the NIC From the Module System Controller 222
Figure A-1
Origin200 Serial Port Pinout Assignments 227
Figure A-2
Origin200 Parallel Port Pinout Assignments 229
Figure A-3
Origin200 Ethernet 10-Base-T/100-Base-TX Port
Pinout Assignments 231
Figure A-4
Origin200 AUX Port Pinout Assignments 232