manualshive.com logo in svg

Silicon Graphics Gauntlet, Administrator'S Manual

Introducing the Silicon Graphics Gauntlet Administrator's Manual – your complete guide to unleashing the full potential of this exceptional product. Discover in-depth instructions, troubleshooting tips, and expert advice, all conveniently available for free download at manualshive.com. Access the manual now and become a Gauntlet master.

Share
Download
background image

Configuring the Firewall for Terminal Services

33

If you need to log in remotely to the firewall, you must use netacl to start the proxies. In
this configuration, administrators on either inside or outside hosts initiate TELNET
requests to the firewall, which accesses the netacl daemon. The netacl daemon checks its
permissions, and determines that the host can use TELNET. The netacl daemon starts the
proxy. The proxy prompts the user for authentication. If it is successful, the proxy
prompts the user for the host and logs the transaction. When the user indicates a wish to
connect to the firewall itself (by specifying the destination “localhost”), the netacl
daemon reviews the destination and starts the actual IRIX TELNET daemon on the
firewall, thereby connecting the user to the firewall.

Using the TELNET and Rlogin Proxies Without Network Access
Control

In this scenario, the firewall runs the TELNET (tn-gw) or Rlogin (rlogin-gw) proxies as
daemons listening for requests on the standard TELNET port (23) and Rlogin port (513).
Common policies allow inside hosts to connect without authentication, and outside
hosts to connect with authentication.

This configuration using just the TELNET and Rlogin proxies (without the netacl
daemon) prohibits running either TELNET or Rlogin on the firewall itself (which would
allow you to login to the firewall remotely).  Because the proxies are running on the
standard TELNET and Rlogin ports on the firewall, all requests start the proxy.  There is
no way to start the TELNET and Rlogin daemons needed to service these requests on the
standard ports.

Configuring the Firewall for Terminal Services

Configuring the Gauntlet firewall involves planning, configuring the firewall, indicating
which daemons the system will run, configuring the proxies to enforce your policy, and
adding the users who will need to authenticate to the Gauntlet user authentication
database.

Planning

1.

Determine whether you wish to allow TELNET and TN3270 connections through
the firewall.

2. Determine whether you wish to allow rlogin connections through the firewall.

Summary of Contents for Gauntlet



















































































































































































































































































































Reviews:

No comments

Related manuals for Gauntlet

Watchguard Firebox NV5 Hardware Manual preview
Firebox NV5
Brand: Watchguard Pages: 11
Dell SonicWALL SOHO Quick Start Manual preview
SonicWALL SOHO
Brand: Dell Pages: 2
EBLOCKER FAMILY User Manual preview
FAMILY
Brand: EBLOCKER Pages: 81
PaloAlto Networks PA-5200 Series Hardware Reference Manual preview
PA-5200 Series
Brand: PaloAlto Networks Pages: 8
PaloAlto Networks VM-100 Deployment Manual preview
VM-100
Brand: PaloAlto Networks Pages: 72
Radware DefensePro VA Installation And Maintenance Manual preview
DefensePro VA
Brand: Radware Pages: 83
Watchguard Firebox T40 Quick Start Manual preview
Firebox T40
Brand: Watchguard Pages: 2
Draytek Vigor2925 Series Quick Start Manual preview
Vigor2925 Series
Brand: Draytek Pages: 36
NETGEAR ProSafe FR114P Specifications preview
ProSafe FR114P
Brand: NETGEAR Pages: 2
D-Link DFL-500 User Manual preview
DFL-500
Brand: D-Link Pages: 140
D-Link DFL-260 - NetDefend - Security Appliance Quick Manual preview
DFL-260 - NetDefend - Security Appliance
Brand: D-Link Pages: 20
PaloAlto Networks PA-200 Quick Start preview
PA-200
Brand: PaloAlto Networks Pages: 2
3Com H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE Installation Manual preview
H3C SECPATH F5000-A5 ADVANCED VPN FIREWALL 12-PORT GIGABIT ETHERNET MODULE
Brand: 3Com Pages: 158
KEYTRONIX I-SAD 19"-S Operating Instructions Manual preview
I-SAD 19"-S
Brand: KEYTRONIX Pages: 74

Brands by name

Popular brands

Load more brands