Home
/
Silicon Graphics
/
Gauntlet
/
Administrator'S Manual

Silicon Graphics Gauntlet, Administrator'S Manual, Page: 107 / 306

Share

Page: 107 / 306

Silicon Graphics Gauntlet Administrator'S Manual Download Page 107

Configuring the Firewall for Sybase Services

81

access Sybase servers on trusted networks. While the Sybase proxy does perform checks
to ensure that the packets appear to be Sybase packets, someone could spoof this
protocol. The Sybase proxy does not perform any user authentication. You are relying
on the authentication mechanisms of the Sybase server to control access to your Sybase
server and its data.

Configuring the Firewall for Sybase Services

Configuring the Gauntlet firewall involves planning, indicating which daemons the
system will run, configuring the proxies to enforce your policy, and configuring Sybase
clients.

Planning

1.

Determine which Sybase servers users need to access. Determine whether you
want to limit access to particular a server or not. Obtain host name or IP address
information for each server.

2. For each server, determine the port(s) on which the server accepts connections.

3. Determine which external hosts can use these services.

4. Determine which internal hosts can use these services.

Configuring Network Services

You do not need to modify the IRIX configuration files on the firewall to support NNTP.
This is a standard service, included in the default versions of these files on the Gauntlet
Firewall.

Configuring the Proxy Rules

In most cases, you do not need to modify the proxy rules for NNTP. This is a standard
service.

«
...
105
106
107
108
109
...
»

Summary of Contents for Gauntlet



















































































































































































































































































































Reviews:

No comments