manualshive.com logo in svg

Silicon Graphics Gauntlet, Administrator'S Manual, Page: 53 / 306

Share
Download
Silicon Graphics Gauntlet Administrator'S Manual Download Page 53

Configuring the Firewall for POP3

27

Planning

Determine your policies for

•

source and destination addresses

•

user access to POP3

Configuring Network Services

You do not need to modify the IRIX configuration files on the firewall to support POP3
traffic.

Configuring the Proxy Rules

If you are using the Gauntlet Firewall default configuration, you need to modify the
proxy rules for POP3 services. This involves accessing the gauntlet-admin Proxies form,
where you can enter the name of the destination POP3 server and modify the timeout
value if you desire. See Appendix B for more information on pop3-gw options,

netperm-table

 options, and order of precedence

Configuring Your Internal POP3 Mail Server

Configure your internal POP3 mail server:

1.

Configure your POP3 mail server to accept POP3 requests from the firewall. If you
need to specify an IP address, remember to use the internal IP address for the
firewall.

2. Ensure that the POP3 mail server is using the POP3 port (110).

3. Configure your POP3 mail server to support APOP.

4. Configure the APOP password for each user.

Summary of Contents for Gauntlet



















































































































































































































































































































Reviews:

No comments