Silicon Graphics CHALLENGE Vault L CMN A01, Owner'S Manual

Page: 23 / 32

Installing a Drive
11
Caution: Channel A on the mixed-channel Vault A is reserved for
single-ended SCSI drives only. The drive sled board jumpers should be
set for either differential or single-ended operation as shown in
Figure 2-1 and Figure 2-2.
3. To install a drive, orient the front-loading drive relative to the Vault L so
that the drive is facing up. See Figure 2-3.
Caution: Always install drives beginning from the bottom to prevent
the Vault L storage box from tipping over.