Silicon Graphics Altix XE340, User Manual, Page: 59 / 70

How To Change the Configuration Data
007-5536-001 51
Set LAN Configuration
Set this feature to configure the IPMI LAN adapter with a network address.
Channel Number - Enter the channel number for the SET LAN Configuration command. This is
initially set to [1]. Press "+" or "-" on your keyboard to change the Channel Number.
Channel Number Status -This feature returns the channel status for the Channel Number selected
above: "Channel Number is OK" or "Wrong Channel Number".
IP Address Configuration
Enter the IP address for this machine. This should be in decimal and in dotted quad form (i.e.,
192.168.10.253). The value of each three-digit number separated by dots should not exceed 255.
Parameter Selector
Use this feature to select the parameter of your IP Address configuration.
IP Address
The BIOS will automatically enter the IP address of this machine; however it may be over-ridden.
IP addresses are 6 two-digit hexadecimal numbers (Base 16, 0 ~ 9, A, B, C, D, E, F) separated by
dots. (i.e., 00.30.48.D0.D4.60).
Current IP Address in BMC
This item displays the current IP address used for your IPMI connection.
MAC Address Configuration
Enter the Mac address for this machine. This should be in decimal and in dotted quad form (i.e.,
192.168.10.253). The value of each three-digit number separated by dots should not exceed 255.
Parameter Selector
Use this feature to select the parameter of your Mac Address configuration.
Mac Address