Silicon Graphics 2400 Owner'S Manual Download Page 18

Page: 18 / 146

xviii

About This Guide

For additional information about displaying reference pages using the

man

command,

see man(1).

In addition, the

apropos

command locates man pages based on keywords. For example,

to display a list of man pages that describe disks, enter the following command at a shell
prompt:

apropos disk

For information about setting up and using

apropos

, see apropos(1) and makewhatis(1M).

Release Notes

You can view the release notes for a variety of SGI products and software subsystems
using one of two utilities:

relnotes

Text-based viewer for online release notes.

grelnotes

Graphics viewer for online release notes.

To see a list of available release notes, type the following at a shell prompt:

relnotes

For more information, see the relnotes(1) and grelnotes(1) man pages.

World Wide Web Accessible Documentation

SGI makes its manuals available in a variety of formats via the World Wide Web (WWW).
Using your Web browser, open the following URL:

http://techpubs.sgi.com/library

Enter a keyword search, or search by title to find the information or manual you need.

Summary of Contents for 2400



















































































































































Search results

Summary of Contents for 2400

Reviews:

Related manuals for 2400

Brands by name

Popular brands

Silicon Graphics 2400, Owner'S Manual

Search results

Summary of Contents for 2400

Reviews:

Related manuals for 2400

Brands by name

Popular brands