Silex technology AP-500AC, User Manual

Page: 57 / 218

3. Configuration Using Web Page
51
AP-500AC settings can be configured from its Web page.
After the initial configuration is finished, access the Web page of AP-500AC on your PC to
change the settings.
3-2. Displaying Web Page of AP-500AC (After Initial Configuration)
1.
Start a Web browser (Internet Explorer, Firefox, etc) on the PC you are using for the setup,
enter the IP address of AP-500AC in the address bar and press the ENTER key.
- By using the device search utility "AMC Finder" that can be downloaded from our homepage,
it is possible to show all AP-500AC units as a list and access the Web page of each.
For how to install and use AMC Finder, refer to 5-12. Product Search Utility .
Note
- If the PC is blocked by MAC Address filter of AP-500AC, the Web page cannot be displayed.
- By default, it is impossible to access Web page as the port filter setting denies HTTP access
over a wireless LAN. To use this method, change the port filter setting in advance to allow
HTTP access over a wireless LAN.
TIP