10
AP-500AC User's Guide
Bottom
Back
(7) Push Switch (SW1) When pressed together with the one on your wireless device while AP-500AC is active,
wireless configuration can be performed. (Smart Wireless Setup)
(8) Push Switch (SW2) Start in
Configuration Mode
Press and hold this switch for more than 3 sec while AP-
500AC is active.
Factory default configuration Press and hold this switch while turning on AP-500AC. Release
the switch in 2 sec or more after Link LED and Status LED turn on.
(9) USB Port
Connect a USB cable (A-type connector).
(10) AC Connector
Connect an AC adaptor.
(11) Link LED (Green)
Turns on when connected to a wired LAN.
(12) Network Port
Connect a network cable.
(13) Status LED (Yellow) Blinks while communicating in a wired LAN.
(14) - (16)
(14) Default
SSID
(2.4GHz/5GHz)
Key
PIN Code
Authentic
Encryption
Password
IP Address
SSID of 2.4GHz/5GHz (default value)
Network key (default value)
Authentication mode (default value)
Encryption mode (default value)
PIN code (default value)
Login password (default value)
IP Address (default value)
(15) E/A
Ethernet Address
(16) S/N
Serial Number
(8)
(9)
(10)
(11)
(12)
(13)
(7)
Summary of Contents for AP-500AC
