Silex technology AP-500AC, User Manual

Page: 33 / 218

3. Configuration Using Web Page
27
5.
Change the network settings on the PC to access AP-500AC.
Example:
In case the default IP Address of AP-500AC is 10.18.52.86, change the network
settings on your PC to the following:
- IP Address : 10.1.2.3
- Subnet Mask : 255.0.0.0
- Please be sure to set a unique address to your PC, that is not used for AP-500AC.
Note
6.
Start a Web browser (Internet Explorer, Firefox, etc) on the PC you are using for the setup,
enter the IP address of AP-500AC in the address bar and press the ENTER key.
- By using the device search utility "AMC Finder" that can be downloaded from our homepage,
it is possible to show all AP-500AC units as a list and access the Web page of each.
For how to install and use AMC Finder, refer to
5-12. Product Search Utility
.
Note