IM_FULL_SL52FM_REV_A
15
P R O F E S S I O N A L S E R I E S
FEATURE “C” PROGRAMMING:
1. Turn the Ignition ‘switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch
5
times (holding in on the 5th push) until a long chirp is heard then release the valet switch.
You are now in the Start feature
‘C’
programming mode.
Press and release the transmitter button corresponding to the feature you want to program.
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory Default Setting
Two Chirps /
LED two pulse
Three Chirps /
LED three pulse
Four Chirps /
LED four pulse
1
3 Hours Timer Start
2 Hours Timer Start
2
Gasoline Engine
Diesel Engine
Wait-To-Start Light
10 sec warm-up
Diesel Engine Wait-
To-Start Light
15 sec warm-up
Diesel Engine Wait-
To-Start Light
20 sec warm-up
3
20 minutes run time
30 minutes run time
10 minutes run time 5 minutes run time
4
Factory alarm disarm
with channel 2 on
Without this feature
5 +
Constant parking light
output upon
Remote Start
Flashing parking light
output upon Remote
Start
6 +
Vehicle without Turbo
(The system Cannot
Arm with the engine
running)
Vehicle with Turbo
(The system Can be
Armed with the engine
running and the engine
will run by itself after the
ignition is turned off)
Press
and
buttons at the same
time to control
Engine run time for
1 minute
Press
and
buttons at the same
time to control
Engine run time for
3 minutes
Five chirps =
Press
and buttons at the same time to control
Engine run time for
5 minutes
Exit:
Turn Ignition to ‘ON’ position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.
