UM_FULL_55SL_REV_A
5
WARNINGS
As with any product that performs automatic functions, there are certain safety precautions that you must
practice and be aware of.
• Keep the transmitter out of children’s reach.
• Do not leave anyone in the vehicle while running on remote control.
• Alert servicing personnel that the vehicle can be started automatically.
•
Do not start the vehicle by remote while it’s in an enclosed area or garage.
• Always apply the parking brake and lock the vehicle as you exit the vehicle.
• The vehicle windows must be rolled up.
• Should the unit malfunction, disconnect the fuse until the problem is corrected.
• The use and operations of this system are the sole responsibility of the operator.
• Some areas may have local ordinances that prohibit leaving a vehicle running on public streets.
•
THIS DEVICE CANNOT BE USED ON ANY STANDARD TRANSMISSION VEHICLE.
FOR AUTOMATIC TRANSMISSIONS ONLY!
E. ACTIVE LOCK
Press button on the transmitter.
The horn will chirp once and parking light will flash once indicating that the system is now locked.
The vehicle’s doors will lock upon arming if interfaced with the security system.
SILENT Lock / Unlock:
Press the transmitter and buttons at the same time. This will lock or unlock your security
system, No chirp sound will be heard and lock / unlock confirmation will be through the vehicles parking lights only.
F. ACTIVE UNLOCK
1. Press button on the transmitter.
2. The horn will chirp twice and the parking lights will flash twice indicating that the security system is now disarmed.
The vehicle’s doors will unlock and the dome light will turn on for 30 seconds upon disarming.
(Note: Power door locks and domelight supervision must be installed with the system.)
PATHWAY ILLUMINATION:
When receiving an unlock /disarm signal, this feature will turn the parking lights
“ON”
for
30 seconds and for 10 seconds receiving a the lock signal. (Programmable)
TWO STEPS DOOR UNLOCK (Optional):
This feature will independently unlock the driver’s door only when
disarming the system. Pushing the button a second time within 3 seconds will unlock the other doors.
G. DEACTIVATING WITHOUT A TRANSMITTER
OVERRIDE THE ALARM WITHOUT A PASSWORD PIN CODE:
(Factory Default Setting)
The Override function may be used if the remote transmitter is lost or inoperative.
1. Enter the vehicle and turn the ignition switch to the
“ON”
position.
2. Within 10 seconds push and release the valet switch. The alarm will stop sounding and enter the disarm mode.
You can now start and operate the vehicle normally.
