IM-FULL-30SL rev A
9
ALARM FEATURES “B” PROGRAMMING
1. Turn the Ignition switch
“ON/OFF”
3
times and stay in the
“OFF”
position.
2. Push the Valet switch
4
times and hold in on the
4th
push. When a long chirp is heard, release the valet switch.
You are now in the Alarm feature
“B”
programming mode.
3. Press the transmitter button corresponding to the feature you want to program.
Press
Transmitter
Button
One Chirp / LED
One Pulse
Factory Default
Setting
Two Chirps / LED
Two Pulses
Three Chirps / LED
Three Pulses
Four Chirps / LED
Four Pulses
1
Pathway Illumination
Feature
“OFF”
Parking Light Turns
“ON”
for 30- Seconds
Upon an Unlock Signal
Parking Light Turns
“ON”
for 30 - Seconds
Upon an Unlock Signal
& 10-Seconds Upon a
Lock Signal
2
Ignition Controlled
Door Locks &
Unlocks
Ignition Controlled
Door Locks Only
Ignition Controlled
Door Unlocks Only
Without Ignition
Controlled Door
Locks & Unlocks
3
0.8-Second Door
Lock Pulses.
3.5-Second Door
Lock Pulse.
Double Pulse Unlock
Comfort Feature
4
3rd Channel Trunk
Pulsed
3rd Channel Trunk
Momentary
5 +
Button =
Silent Arm/Disarm
Button =
Channel 4 AUX 1
6 +
Gray Wire = Trunk
(Channel 3) Output
Gray Wire = Two Step
Door Unlock Output
7 +
Horn Chirp Duration
Standard 20mS
Horn Chirp Duration
50 mS
Horn Chirp Duration
30 mS
Horn Chirp Duration
10 mS
Exit:
Turn Ignition to
“ON”
position, or leave it for 15 seconds. 3 long chirps will confirm exit.
