IM-FULL-30SL rev A
8
ALARM FEATURES “A” PROGRAMMING
1. Turn the Ignition switch
“ON/OFF”
3
times and stay in the
“OFF”
position.
2. Push the Valet switch
3
times and hold in on the
3rd
push. When a long chirp is heard, release the valet switch.
You are now in the Alarm feature
“A”
programming mode.
3. Press the transmitter button corresponding to the feature you want to program.
4. Press the transmitter button again to change the feature. Simply keep pressing the transmitter button again
until the module advances to your desired setting.
Press
Transmitter
Button
One Chirp /
LED One Pulse
Factory Default
Setting
Two Chirps /LED
Two Pulses
Three Chirps /LED
Three Pulses
Four Chirps /LED
Four Pulses
1
Active arming
Passive Arming without
Passive Door Locking
Passive Arming
with Passive Door
Locking
2
Automatic
Rearm “OFF”
Automatic Rearm
“ON”
3
45 Seconds
Delay Door Ajar
Error Chirp
Instant Door Ajar
Error Chirp
4
Siren
Confirmation
Chirp “ON” Only
All Confirmation
Chirps
“ON”
Horn Confirmation
chirp
“ON”
only
All Confirmation
Chirps
“OFF”
5 +
White wire=
Dome Light
Output
White wire = 4th
Channel pulsed
White = 4th
Channel Momentary
White = 4th
Channel Latched
6 +
Lock/Arm &
Unlock/Disarm
Confirmation
Chirps
Lock/Arm Confirmation
Chirp Only
7
+
ALARM with
Keyless Entry
Keyless Entry ONLY
8. +
Car Jacking
feature OFF
Car Jacking feature
“ON”
Exit:
Turn Ignition to
“ON”
position, or leave it for 15 seconds. 3 long chirps will confirm exit.
45 seconds Delay Door Ajar Error Chirp:
This feature controls the error chirp that is generated if the system is armed with the door trigger active.
This is useful in a vehicle that has a long dome light delay after the door has been closed. If the system is
armed before the dome light has turned off, the security system will generate the door trigger error chirp.
Use this feature to disable the door open error chirp.
