IM-FULL-30SL rev A
3
MAIN POWER CONNECTOR
RED / WHITE: PARKING LIGHT RELAY INPUT
WHITE: PARKING LIGHT OUTPUT
BLACK : MAIN SYSTEMS GROUND
BROWN : POSITIVE SIREN OUTPUT
RED : FUSED 12 VOLT (+) BATTERY POWER
3 PIN, DOOR LOCK CONNECTOR
1. Blue
Wire
3. Green
Wire ( - ) Lock Pulse
( - ) Unlock Pulse
8 - PIN ACCESSORY CONNECTOR
GRAY WIRE / CHANNEL 3 NEGATIVE TRUNK OUTPUT
ORANGE :STARTER INTERRUPT O/P RELAY REQUIRED
YELLOW / IGNITION INPUT (+)
GREEN / (-) DOOR TRIGGER INPUT
BLUE / (-) INSTANT TRIGGER INPUT ( HOOD, TRUNK)
VIOLET / (+) DOOR TRIGGER INPUT
BROWN/ WHITE / (-) HORN OUTPUT.
WHITE: DOME LIGHT OUTPUT(OR CH#4 O/P) RELAY REQUIRED
WIRING
Keep wiring away from moving engine parts, exhaust pipes and high-tension cable. Be sure to tape wires that pass
through holes on the firewall to prevent fraying.
CAUTION:
Do not connect the wire harness to the control module until all wiring to vehicle is complete.
2 PIN CONNECTOR (THE LED STATUS INDICATOR)
The led indicator status should be mounted in a highly visible area such as the top of the dashboard, on top of the shifter
console or on the dashboard face. Leave at least 6mm space behind the mounting location for LED housing. Once a
suitable location is chosen, drill a 6mm hole. Run the LED wires through the hole, then press the 2 pin LED housing into
place. Route the LED wires to the control module.
