Silca Delta 2000 FO, Operating Manual

Page: 14 / 25

DELTA 2000 FO Operating manual - English
10 Copyright Silca 1998
5.4 Description of work station
The machine needs only one
operator, who has the following
controls at his/her disposal
(fig.8):
-
safety device (X).
- master switch (D), placed
on the left-hand side of the
machine; provided with a
warning light indicating that
the machine is live.
- carriage lever handle (B1).
Fig. 8
5.5 Graphics
5.6 Separate parts
The detachable parts of the machine are packed separately and must be fitted to the DELTA 2000 FO
by the operator, as follows:
P
OWER CABLE
230V version:
first connect the safety device (X) to the key-cutting machine and the power cable then connect the free
end of the power cable to the power mains (fig.9).
110V version:
connect the key-cutting machine and the power cable then connect the free end of the power cable to
the power mains (fig.9).
Fig. 9
5.7 Connection to the mains
It is extremely important for the operator’s safety to ensure that the key-cutting machine is connected
to the power mains with the right voltage and by means of a properly earthed differential switch.
D
B1
X
THE USE OF PROTECTIVE GOGGLES IS
COMPULSORY
power cable
power
mains
power cable
power
mains
X