Silca D432985XA Operating Manual Download Page 21

Page: 21 / 42

Operating Manual - English

SBB

LOADING TOKENS

To load new TOKENS onto the machine you must buy a Smart Card containing the credits.
Insert the Smart Card into the SBB before turning on the device (see fig. 5).

Fig. 5

Press the

function key

If credits have been transferred from the smart card to SBB successfully, the display will show

Press any key to return to the previous menu

If the credits have not been successfully transferred from the SMART CARD to SBB, the display will show one
of the following errors:

- Press any key to return to the previous menu.
- Check that the smart card has been inserted properly and repeat the procedure.

- TOKEN FROM SMARTCARD -

OPERATION

SUCCESSFULLY

COMPLETED!

Press any key...

ERROR

NUMBER

ERROR MESSAGE ON DISPLAY

CAUSE/SOLUTION

SMART CARD. COMMUNICATION
ERROR.

CHECK INSERTION POSTION

The card has not been inserted
properly, or is damaged

SMART CARD. TYPE MISMATCH

Try updating the device with the
latest version available and if this
does not work, return the card to
Silca as it may be damaged

SMART CARD. ALREADY USED

The card has already been used
and cannot be re-used

SMART CARD. VERSION
MISMATCH. FIRMWARE UPDATE
REQUIRED.

Try updating the device with the
latest version available and if this
does not work, return the card to
Silca as it may be damaged

SMART CARD. WRONG TOKEN
NUMBER

The card is damaged, return to
Silca

Summary of Contents for D432985XA











































Search results

Summary of Contents for D432985XA

Reviews:

Related manuals for D432985XA

Brands by name

Popular brands

Silca D432985XA, Operating Manual

Search results

Summary of Contents for D432985XA

Reviews:

Related manuals for D432985XA

Brands by name

Popular brands