Copyright Silca 2006
11
Operating Manual - English
SBB
6.4.4
COMMUNICATION PROCEDURE WITH THE IMMOBILIZER
The following message appears:
The communication procedure with the immobilizer starts; if the car model selected is correct and the
immobilizer is detected, the
Functions menu by make appears
, otherwise an error message is shown (see
chap. 8 "WARNING/ERROR MESSAGES", page 24).
6.5
PIN CODE SERVICE
This menu describes some of the functions required to obtain a
PIN CODE
(for certain vehicle models only)
without going to the dealer.
Select the item “
PIN CODE SERVICE
” and press
ENTER
.
The display will show:
- Use the Down/Up arrow keys to select the specific model, then press
ENTER
.
Press
ESC
to quit.
6.5.1
VAG PIN CODE
This function can read the vehicle
PIN CODE
directly from the OBD-II socket (only for certain VAG models).
Select “
PIN CODE SERVICE
” from the main menu, then “VAG
PIN CODE
”.
The display will show:
6.5.1.1
DISABLED VEHICLE MODEL
If the function is not enabled a beep is heard and a message appears:
6.5.1.2
ENABLED VEHICLE MODEL
If the function is enabled the following message appears:
- Turn the key to the ON position.
Press any key.
Please wait
connecting...
- PIN CODE SERVICE -
VAG PIN CODE
VAG 7-4 PIN CONV.
> HYUNDAI PIN CODE
KIA PIN CODE
- VAG PIN CODE -
Device not enabled
for this model.
Insert password from
menu ENABLE FLAGS
(41)
Turn the ignition on!
Press any key...
