manualshive.com logo in svg

Silca D432985XA, Operating Manual

Share
Download
Silca D432985XA Operating Manual Download Page 5

Copyright Silca 2006

1

Operating Manual - English

SBB

GENERAL

The device is designed to the principles of European CE Directives.
The materials used in its manufacture are not dangerous and their use complies with directives. Its design 
features make the machine and all its components completely safe to use.

FURTHER RISKS

There are no further risks arising from the use of the machine.

PROTECTION AND SAFETY PRECAUTIONS FOR THE OPERATOR

The operations for which the machine has been designed are easily carried out at no risk to the operator.

SAFETY REGULATIONS

To operate under conditions of maximum safety do not use the device without reading and understanding 
clearly the contents of this operating manual.

• Check the electrical wiring periodically; if the wires are worn they should be repaired or replaced.

• Never work with wet, greasy or oily hands.

• Disconnect the device from the mains when it is not in use or in order to carry out maintenance work.

• Never tug at the power supply wire; make sure it does not come into contact with oil, sharp edges or heat.

• It is dangerous to use the device in areas at risk (damp or wet).

• Always work in a well lighted area.

• Keep the work area clean and remove all tools before turning on the machine.

• All visitors, children in particular, must keep at a safe distance and not touch the machine or electrical wiring.

• Do not use the device for purposes different from those described in the Operating Manual.

POWER SUPPLY

The machine is supplied with electricity at 12 Vdc provided by the vehicle battery, or as an alternative can 
be powered from a 15 Vdc universal feeder supplied with the machine.

TURNS ON

The machine turns on automatically when the connection (OBD II or Optional) is connected to the diagnostics 
socket or one of the feeder wires supplied with the machine is used.

IDENTIFICATION OF THE SBB DEVICE

The device has an identification plate showing its serial number (fig. 1).

Fig. 1

(*) see chap. 11 "WASTE DISPOSAL", page 34.

N° MATRICOLA
SERIAL No.

TIPO

TYPE

V

W

HZ

A

manufacturer’s
address

serial No.

type of machine

working
frequency

absorbed current

power

year of
manufacture

CE mark

working
voltage

®

MADE IN ITALY

SILCA SPA
VIA PODGORA 20
TREVISO - ITALY
Tel.      0438-9136
Fax     04138-913800
e-mail  [email protected]

absorbed

L

Summary of Contents for D432985XA











































Reviews:

No comments

Brands by name

Popular brands

Load more brands