5
ACCESSORIES
Required accessories for heating plates:
The BT710 and BT010 room thermostats require a receiver.
PT712 - digital thermostat with room sensor (Item no. 50446)
- Enables regulation based on the room temperature
- The required temperature can be changed quickly
- 2 weekly programmes with 6 temperature changes per day
- Power reserve for more than 100 hours in the event of a
power cut
BT710 - radio room thermostat (Item no. 50434)
- Used to switch electrical heating systems in houses,
apartments and offices on and off based on the temperature
- Can control up to 9 receivers
- Simple and flexible installation - without mains
connection and cables
BT010 - radio room thermostat (Item no. 50435)
- Can trigger one receiver
- The range within a building is at least 35 m depending on
the receiver
- Benefits: the set temperature can be changed quickly using the hand
wheel, quick selection switch for night moderation, frost protection
IPP-R01 - Empfänger für BT710 und BT010 - Unterputz
(Item no. 50648)
- Suitable for switching infrared heaters, electric radiators, etc.
on and off
- The BT001 switches the connected consumers off and on based on the
data transferred from the transmitter
BT003 - Empfänger für BT710 und BT010
- in einer Zwischensteckdose (Item no. 50437)
- Suitable for switching infrared heaters, electric radiators, etc.
on and off
- The BPT003 switches the connected consumers off and on based on the
data transferred from the transmitter
- Plugged directly into the socket
TS20 - Thermoschaltersteckdose (Item no. 50520)
- is a digital, temperature-dependent, switched socket for automatic
regulation of SIKU Infraplate pro series electrical heating systems
- up to six time intervals with three temperature levels can be set
for each day
NOTE:
Info according to new ERP- Standard 1188:
As of 2018, Infraplate pro Infrared non-storage type heating appliance
must be operated only as a combination of a room thermostat with
integrated timer and room ventilation detection device.
