Siko IK360L, Translation Of The Original Installation Instructions, Page: 23 / 28

IK360L
Accessory connector English
IK360L · Date 01.09.2020 · Art. No. 89208 · Mod. status 198/20
23
Disposal
The inclinometer's electronic components contain materials that are
harmful to the environment and are carriers of recyclable materials at the
same time. Therefore, the inclinometer must be recycled after it has been
taken out of operation ultimately. Observe the environment protection
guidelines of your country.
7 Accessory connector
(not included in the scope of delivery)
7.1 Mating connector M12 straight inclusive cable
• Accessory SIKO art. no. "KV08S3".
7.2 Straight mating connector M12
Advice
` Strand cross sections of lines ≤0.5 mm² / cable feed-through: ø6 ...
ø8 mm.
• Accessory SIKO art. no. "83525" (socket contact 8 pin).
Mounting ( Fig. 5 )
1. Mount seal to screen ring
4
.
2. Slip parts
1
...
6
over outer cable.
3. Strip cable sheath, isolate conductor.
4. Shorten and turn down screen.
5. Clamp wires into socket
7
(follow connection diagram chapter 4.2 ).
6. Mount parts
2
...
6
. Place screen around screen ring
4
.
7. Screw pressure screw
1
on coupling sleeve
5
.
NOTICE