background image

Technical Support

QUESTIONS?  SIIG’s Online Support has the answers!

Simply visit our Web site at www.siig.com and click on

Support.  Our online support database is updated daily

with new drivers and solutions.  The answers to your

problems could be just a few clicks away.
If you can't find answers or solutions to your questions, you

have an option to submit the problems online to one of our

technical support analysts and we will promptly respond

to you with answers or solutions.
The 5-year manufacturer warranty supplied with this

product is offered by SIIG, Inc.  If you should happen to

encounter any problems with this product, please follow

the procedures below.
1.

If it is within the store's return policy period, please

return the product to the store where you purchased

from.

2.

If your purchase has passed the store's return policy

period, please contact SIIG.  See SIIG's Limited 5-year

Warranty card for more information.

Online Store

SIIG offers all of our products online at our company

store.  Visit us at http://onlinestore.siig.com to find

our complete line of products, including hard to find

items and accessories (power adapters, cables,

upgrade kits, etc.).

Summary of Contents for USB 2.0+1394 6-Port Bay Hub













Reviews: