background image

USB 2.0+1394 6-Port Bay Hub is a trademark of SIIG, Inc.

SIIG and SIIG logo are registered trademarks of SIIG, Inc.  Microsoft and Windows are

registered trademarks of Microsoft Corporation.  Pentium is a registered trademark of Intel

Corporation.  Other names used in publication are for identification only and may be trademarks

of their respective companies.

April, 2004                 Copyright ©2004 by SIIG, Inc. All rights reserved.

PRODUCT NAME

USB 2.0+1394 6-Port Bay Hub

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device  complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:  (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undes-
ired operation.

THE PARTY RESPONSIBLE FOR

PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Ave.

Fremont, CA  94538-3152

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading computer upgrade

manufacturer of I/O connectivity products, including PCI & ISA

serial and parallel ports, USB, Serial ATA & UltraATA controllers,

FireWire (1394a/b), Networking, Sound Cards, and other accessories.

SIIG is the premier one-stop source of upgrades.
SIIG products offer comprehensive user manuals, many user-friendly

features, and all products are backed by a 5-year manufacturer

warranty.  High-quality control standards are evident by the overall

ease of installation and compatibility of our products, as well as one

of the lowest defective return rates in the industry.  SIIG products can

be found in most computer retail stores, mail order catalogs, and e-

commerce sites in the Americas and the UK, as well as through major

distributors, system integrators, and VARs.

Summary of Contents for USB 2.0+1394 6-Port Bay Hub













Reviews: