5
Installing the USB 2.0+1394 Bay Hub
Important: In order for the USB 2.0+1394 6-Port Bay Hub
to work properly, the driver of your existing USB 2.0
host adapter and existing 1394 host adapter must be
installed properly.
Assuming your USB 2.0 and 1394 host adapters are
correctly set up with the correct driver, the USB 2.0+1394
6-Port Bay Hub should automatically be detected and
installed when connected.
1. Turn OFF the power to your computer and all
connected peripheral devices.
2.
Unplug the power cord from the back of the
computer.
3.
Remove the computer’s cover.
4.
Select an available 3.5" or 5.25" drive bay for the
USB 2.0+1394 6-Port Bay Hub, remove the cover
plate from the selected drive bay.
Note: When installing the USB 2.0+1394 6-Port Bay
Hub into a 5.25" drive bay install the hub into the
5.25" mounting rack before mounting it into the
drive bay and follow the same assembly
instructions. Refer to 5.25" Mounting Rack
Assembly on page 4.
Summary of Contents for USB 2.0+1394 6-Port Bay Hub
Page 10: ...10 Blank Page...
