SIIG US2265, User Manual

Page: 18 / 48

RAID
2-7
2-5.2 RAID 1 (Mirroring)
1. At boot press F3 when prompted to enter the RAID BIOS
utility.
2. Press F2 to create a RAID set.
3. Press F2 to create a Mirror set.
4. Press Y to use Auto setup.
5. Press Y to accept the configuration.
6. Configure another RAID set or press ESC to reboot.
2-5.3 RAID 0+1 (Mirror-striping)
1. At boot press F3 when prompted to enter the RAID BIOS
utility.
2. Press F2 to create a RAID set.
3. Press F3 to create a Mirrored-Striped set.
4. Press A to Auto configure.
5. Press Y to accept the configuration.
6. Press ESC to reboot.
2-6 Creating a Spare Drive
The RAID BIOS utility has the option of designating a hard drive
as SPARE . When a hard drive failure occurs in a RAID 1 set the
Auto-rebuild feature enables a drive designated as SPARE to
become the new member of the mirror set. The RAID BIOS then
automatically rebuilds the mirror with the new member drive. The
Spare drive must be equal to or larger than the Mirrored set size.
1. At boot up press
F3 to enter the RAID BIOS utility.
2. Press F3 to create a spare drive.
3. Enter the drive number of the hard drive.
4. Press
Y to confirm your choice. The spare drive will be
created and listed as the last Set.
5. Press ESC to exit the RAID utility.
The Spare drive is now ready to replace a failed drive.