SIIG US2265, User Manual

Page: 25 / 48

User's Manual
3-4
4. After Windows restarts, at the Add New Hardware Wizard ,
click Next .
5. Choose Search for the best driver... and click Next .
6. Uncheck all boxes and click Next .
7. Click Next and Finish .
8. At the Add New Hardware Wizard, click Next .
9. Choose Search for the best driver..., and click Next .
10. Uncheck all boxes and click Next .
11. Click Next , Next . If prompted to, insert your Windows 98SE
CD-ROM and click OK . Click Finish .
12. Repeat steps 8-11 two more times.
13. At the Add New Hardware Wizard , click Next .
14. Choose Search for the best driver... , and click Next .
15. Insert the UltraATA 100 RAID driver diskette, check Floppy
disk drives , click Next .
16. Click Next and Finish .
17. Remove the driver diskette and restart the computer to
complete installation.
3-3.2 Driver Installation for Windows ME
1. Install the USB 2.0+1394+UltraATA RAID into the computer.
2. Boot up your computer. Windows will detect a PCI standard
PCI-to-PCI bridge .
3. At the Add New Hardware Wizard select Automatic Search
for a better driver (Recommended) , click Next , then click
Finish .
4. Repeat step 3 when Windows detects an OHCI Compliant
IEEE 1394 Host Controller .
5. Click Cancel at the Add New Hardware Wizard when
Windows detects a PCI Universal Serial Bus .
6. Insert the UltraATA 100 RAID driver diskette.
7. Repeat step 3 when Windows detects a PCI RAID
Controller .
8. Click No when prompted to restart.