Appendix
39
Appendix
BIOS
Introduction
Your Transport GX21 (B5350) system includes a powerful
Tiger i7320R S5350 motherboard with Phoenix BIOS on 8
MBit flash ROM.
The BIOS is the motherboard’s basic input/output system.
The BIOS contains all the settings required to control the key-
board, display, disk drives, serial communications, and a
number of miscellaneous functions. This section of the
appendix describes the various BIOS settings that can be
used to configure your system.
BIOS setup utility
With the BIOS setup utility, you can modify BIOS settings and
control the features of your system. The setup utility uses a
number of menus.
Note:
All menus shown in this section are
based on a typical system. The actual menus
displayed on your screen may look different
depending on the hardware and features
installed.
To start the BIOS setup utility:
1. Turn on or reboot your system.
2. Press <Del> during POST (F4 on remote console) to
start the BIOS setup utility.
Summary of Contents for Transport GX21 B5350
