2.4 Rack mounting
Chapter 2: Setting up
23
2.4
Rack mounting
Follow these instructions to mount the Transport GX21
(B5350) into an industry standard 19" rack.
Note:
Before mounting the Transport GX21 in a
rack, ensure that all internal components have been
installed and that the unit has been fully tested.
Maintenance can be performed on the unit while in
a rack but it is preferable to install the device in a
fully operational condition.
1. Screw the mounting ears to the Transport GX21 as
shown using 4 screws from the supplied nuts, screws
and washers kit.
2. Screw the sliding rail mounting brackets to the sliding
rails as shown, using the short black screws from the
supplied nuts, screws and washers kit.
Note:
Ensure that the brackets with the cut away
section (to accommodate the handles on the front
of the unit) are fixed to the front end of the rail.
3. Fully extend the sliding rails until they lock.
Summary of Contents for Transport GX21 B5350
