SII SA-4320 Instruction Manual Download Page 4

Page: 4 / 66

Safety Precautions

Read the “Safety Precautions” before using the device, and use the device correctly
and safely.

This manual uses the following symbols to describe precautions for the correct and
safe use of the device, and to prevent damage to the equipment.

: Precautions (including danger and warning).

: Prohibited actions.

: Forced actions or instructions.

Some of these symbols with graphics indicate specific precautions, prohibitions, and
instructions as below.

Read carefully before continuing.

Warning

Warning: Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.

Caution

Caution: Indicates a potentially hazardous situation which, if
not avoided, could result in injury, or damage to the
equipment.

Examples of Symbols

“Do not disassemble”.

“Remove the power supply plug from the outlet”.

Summary of Contents for SA-4320



































































Search results

Summary of Contents for SA-4320

Reviews:

Related manuals for SA-4320

Brands by name

Popular brands

SII SA-4320, Instruction Manual

Search results

Summary of Contents for SA-4320

Reviews:

Related manuals for SA-4320

Brands by name

Popular brands