SII SA-4320, Instruction Manual

Page: 36 / 66

4-10
4.3.4 WLAN test
○
Standard test
This function tests the communications between the device, the Wireless Station, and
the Wireless Repeater. Test the communication environment of the anticipated
installation sites if the wireless area measurement does not assure it as an optimum
site.
When performing the standard test before installing in the store, place the Wireless
Station (or Wireless Repeater) at the expected installation site, and set to test mode.
Refer to each device’s manual for how to set to test mode. Use normal mode if the
operation has already started in the store.
Select [WLAN Test] – [Standard Test] from the function menu.
○ Advanced test
This function tests the communications between the device, the Wireless Station, and
the Wireless Repeater.
When performing the standard test before installing in the store, place the devices at
the expected installation sites, and set to test mode. Refer to each device’s manual
for how to set to test mode. Use normal mode if the operation has already started in
the store.
Select [WLAN Test] – [Advanced Test] from the function menu.
○ Receive mode
This mode sets the receiver.
○
Area test
This function lists signal levels between the device and all the stations (repeaters)
available for the device. The signal level data is refreshed every 8 seconds. Set the
same system ID as the station when performing this test.