-
16
-
(4) Pull the thermal paper straight and then push the center of paper cover certainly to close it, to
avoid one side lock defect.
○
○
×
×
Top paper
discharge
model
Front paper
discharge
model
NOTE
- Pull the thermal paper straight.
- Push the paper cover certainly to avoid one side lock defect.
(5) After closing the paper cover, paper feed and paper cutting are performed automatically.
NOTE
- Be sure to pull the release lever to the end. If not, the paper cover may not open.
- DO NOT cover the paper outlet or hold down the thermal paper. Doing so may cause
paper jam.
- DO NOT touch the platen roller and gears in the printer. Doing so may cause loss of
printing quality or a failure.
- Always use the paper roll the core of which has 12 mm inside diameter and 18 mm
outside diameter. Moreover, DO NOT use the paper roll with glued or taped end.
HINT
Leaving the printer with the thermal paper that is in the thermal head and platen roller for
a long time may cause a paper-feeding error. In that case, open the paper cover to
release the thermal head and the thermal paper before using, and then close the paper
cover to use it.
