: e1 map del 1 2 3
E1A: Long-Haul FRAMED Code=HDB3 – ONLINE
0 . 1 . 2 . 3
01234567890123456789012345678901
---*****************************
Used timeslots: 29 Payload: 1856 kbit/s
:
: e1 map del 7-14
E1A: Long-Haul FRAMED Code=HDB3 – ONLINE
0 . 1 . 2 . 3
01234567890123456789012345678901
---****--------*****************
Used timeslots: 21 Payload: 1344 kbit/s
:
: e1 map del all
E1A: Long-Haul FRAMED Code=HDB3 – ONLINE
0 . 1 . 2 . 3
01234567890123456789012345678901
--------------------------------
Used timeslots: 0 Payload: 0 kbit/s
:
To apply a new timeslot map enter the
dsl retrain
command.
It is required to reconfigure the DSL interface upon changing the
map.
Defining of timeslots is possible in framed mode only. In unframed mode the
entire E1 trunk is passed through DSL so the required DSL rate is 2048
kbps.
The error message appears on any attempt to change the timeslot map in
unframed mode:
: e1
E1A: Long-Haul UNFRAMED Code HDB3 – ONLINE
: e1 map add 1-5
Invalid option for unframed mode
:
32