The
stat
command displays current status and statistics of the modem
interfaces:
: stat
E1A: Long-Haul FRAMED CAS Code=HDB3 – ONLINE
FAS_Sync=No CAS_Sync=No
CV=0 FASE=0
Loop Loss: 37.5 dB
DSL: Rate=3072 kbit/s Code=TCPAM32 MASTER – ONLINE
LOSW=13 CRC6=14 RETRAIN=3 of 4
Loop Loss: 0.0 dB Noise Margin: +22.0 dB
Total online time: 0 days 00:21:24
Total offline time: 0 days 00:02:11
Connect duration: 0 days 00:23:35
:
Upon completion of this command any statistics data of the Е1 interface is
automatically reseted (see ch. 3.4.4 of this Guide) unlike statistics data of
the DSL interface. That data should be reseted explicitly by the
stat
command with the
reset
or
dsl
stat reset
options (see ch. 3.3.4).
The
default
command resets all modem settings to factory default values.
: default
Load factory default and reboot? (y/n) Y
Default settings loaded
Rebooting…
entering cancel
N
or any other character except
Y
breaks the command
execution and causes the prompt to enter a next command.
The
reboot
command performs reset of the modem.
21
