If the data rate is not within the permitted range for an entered line coding
mode, the following message appears:
invalid line code for this
rate
.
3.3.4 Link statistics
Use the
dsl
command with the
stat
option to view link statistics:
: dsl stat
DSL: Rate=512 kbit/s Code=TCPAM8 SLAVE - ONLINE
TX=1341 RX=1231 ERR=1 LOSW=12 CRC6=11 RETRAIN=2 of 5
Loop Loss: 0.0 dB Noise Margin: +22.0 dB
Total online time: 0 days 00:42:19
Total offline time: 0 days 00:18:02
Connect duration: 0 days 00:15:53
:
Legend:
ONLINE
– the DSL link is activated;
OFFLINE
– the DSL link is not activated;
TX
– the number of transmitted packets;
RX
– the number of received packets;
ERR
– the number of received packets with errors;
LOSW
– the number of frame synchronization loss events;
CRC6
– the number of CRC6 checksum errors;
RETRAIN
– the number of successful attempts to establish the link with
regard to the total number of attempts;
Loop Loss
– loop loss (attenuation level), dB;
Noise Margin
– loop noise margin, dB;
Total online time
– total time elapsed when link is on;
Total offline time
– total time elapsed when link is off;
Connect duration
– duration of the last successful session;
Use the
dsl
command with the
stаt reset
option to clear the statistics
counters:
25
