1.2 Side View
Left Hand Side (Figure 1-3)
1.
AC Power Connector –
Used to insert the AC power cord.
2.
Fuse –
Up to 3 Amp.
3.
Power Switch –
On when switches to [I]; Off when switches to [O]
Right Hand Side (Figure 1-4)
4.
Parallel Interface Connector (Centronics)
– Used to connect the cutting plotter to
a computer through a parallel interface cable.
5.
Cutting Force Control Slider
– Set the blade force here.
6.
Serial Interface Connector (RS-232C)
– Used to connect the cutting plotter to a
computer through a serial interface cable.
7.
Dip Switch
- Used for various parameter settings.
1-2